This machine adopts multi columns, transverse beams and a rotary working table, and the bed adopts plate welding and aging treatment. This machine has a good rigid performance, and the transformer can move around. The rotary working table is driven by an AC servo motor, and the guide adopts a rectangular linear guide. The rotary working table can separate gears automatically.

Manual adjustment is unnecessary during induction hardening process, and the equipment can finish the process automatically. This machine can be used for ring type single-gear teeth or roller scanning induction hardening.

1. Machine structure: upright columns plus a horizontal rotary working table (gantry type are optional).

2. Rotation mode: automatic gear separation.

3. Working mode: Horizontal supporting type (positioning fixture can clamp the work-piece inner / outer ring).

4. Clamping: manual alignment (automatic alignment, and automatic clamping/unclamping are also available).

5. Induction coil and work-piece clearance: electrical automatic tracking device / mechanical floating tracking device.

6. Electric control: touch screen and PLC (Siemens 808D/828D/840DSL are optional).

7. Big/small work-piece adjustment: adjust transformer sliding table (transverse beam moving).

8. Display: heating speed, cooling water temperature, quenching fluid temperature, pressure, current and power.

9. Driving motor: AC servo motor.

10. Number of axis: 3.

11. Work station: 1 (2 are optional, when one for induction hardening, the other is for loading and unloading), simultaneous induction hardening of the two gears can be adopted to improve the efficiency.

12. Adaptability: adapted to both tracker and gear tooth induction hardening.

13. Space between tracks: including two tracking modes: electronic track and mechanical track. In electronic track, the tracking space is within 0.1mm to ensure the induction hardening quality consistency.

14. Consistency of induction hardening quality: good.